7. Chassi s i ntrusi on connector (4-1 pi n CH ASSI S)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

A8S-X SE

+5VSB MB

Chassis Signal GND

CHASSIS

(Default)

A8S-X SE Chassis Intrusion Connector

8. GAME/MI DI connector (16-1 pi n GAME)

This connector supports a GAME/MIDI module. If a GAME/MIDI module is available, connect the GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.

A8S-X SE

A8S-X SE GAME Connector

OUT

IN

+5V J2B1 J2CX MIDI J2CY J2B2 MIDI

GAME

J1B1 J1CX GND GND J1CY J1B2

+5V

+5V

The USB/GAME module is purchased separately.

1-26

Chapter 1: Product introduction