1.From the create array menu, select Array Mode, then press <Enter>. The supported RAID configurations appear on a
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
2.Select RAID SPAN for capacity then press <Enter>.
3.From this point, you can
4.Select Auto Setup for Capacity and press <Enter>. The following confirmation message appears.
Auto create array will destroy all data on disks, Continue? (Y/N)
5.Press <Y> to confirm or <N> to return to the configuration options. If you selected <Y>, proceed to step 11.
6.Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk drive/s, then press <Enter>. An asterisk appears before a selected drive.
7.Select Start Create Process and press <Enter> to start RAID system setup. The following inquiry appears:
Save the data on Span 0 disk after creation? (Y/N)
8.If you select <Y>, the utility will save your disk data on Span 0 disk then configure the RAID set. Proceed to step 11.
9.If you select <N>, the following confirmation message appears.
The data on the selected disks will be destroyed. Continue? (Y/N)
ASUS | 5 - 23 |