CAS# latency (Tcl) [Auto]
Controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [Auto] [2.0] [2.5] [3.0]
RAS# to CAS# delay (Trcd) [Auto]
Controls the latency between the DDR SDRAM active command and the read/write command. Configuration options: [Auto] [2] [3] [4] [5] [6] [7]
Min RAS# active time (Tras) [Auto]
Sets the minimum RAS# active time. Configuration options: [Auto] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
Row precharge Time (Trp) [Auto]
Sets the Row precharge time. Configuration options: [Auto] [2] [3] [4] [5] [6]
Master ECC Enable [Enabled]
Enables or disables the Master ECC feature.
Configuration options: [Disabled] [Enabled]
Upstream LDT Bus Width [16 bit]Sets the upstream Lightning Data Transport (LDT) Bus Width. Configuration options: [ 8 bit] [16 bit]
Downstream LDT Bus Width [16 bit]Sets the downstream Lightning Data Transport (LDT) Bus Width. Configuration options: [ 8 bit] [16 bit]
LDT Bus Frequency [Auto]Sets the Lightning Data Transport (LDT) Bus frequency.
Configuration options: [Auto] [1 GHz] [800 MHz] [600 MHz] [400 MHz] [200 MHz]
VLink Mode Selection [By Auto]Sets the VLink mode. Configuration options: [By Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4]
PEG Data Scrambling [Auto]Disables or enables the PCI Express™ graphics data scrambling. Configuration options: [Auto] [Disable] [Enable]
4 - 20 | Chapter 4: BIOS setup |