10.Press <Y> to confirm or <N> to return to the configuration options.

11.Press <Esc> to go back to main menu.

Delete Array

1.From the VIA RAID BIOS utility main menu, select Delete Array then press <Enter>.

VIA Tech. RAID BIOS Ver 1.xx

Create Array

Create a RAID array with

Delete Array

the hard disks attached to

Create/Delete Spare

VIA RAID controller

Select Boot Array

 

 

Serial Number View

F1

: View Array/Disk Status

 

↑ ,↓ : Move to next item

 

Enter : Confirm the selection

 

ESC

: Exit

 

Channel

Drive Name

Array Name Mode

Size(GB) Status

[

]Serial_Ch0 Master XXXXXXXXXXX

ARRAY

0

SATA

999.99

XXXXXXX

[

]Serial_Ch1 Master XXXXXXXXXXX

ARRAY

0

SATA

999.99

XXXXXXX

2.From the list of channel used for IDE RAID arrays, press <Enter> to select a RAID array to delete. The following confirmation message appears.

The selected array will be destroyed.

Are you sure? Continue? Press Y/N

3.Press <Y> to confirm or <N> to return to the configuration options.

Select Boot Array

1.From the VIA RAID BIOS utility main menu, select Select Boot Array then press <Enter>.

2.From the list of channel used for IDE RAID arrays, press <Enter> to select a RAID array for boot. After selection, the Status of the selected array will change to Boot.

3.Press <ESC> to return to the menu items. Follow the same procedure to deselect the the boot array.

5 - 24

Chapter 5: Software support