1.6LED information

The barebone system comes with five LED indicators. Refer to the following table for the LED status description.

Power LED (blue)

HDD Access LED (green)

! Message LED (red)

Drive status LED (green)

LED

Icon

Display status

Description

 

 

 

 

System

 

 

 

Power LED

 

ON

System power ON

 

 

Blinking

System is in suspend mode

HDD Access LED

 

OFF

No activity

 

 

Blinking

Read/write data into the HDD

Message LED

!

OFF

System is normal; no incoming event

 

 

Blinking

ASMS indicates a HW monitor event

 

 

 

 

Hard disk drives

 

 

 

Drive Status LED

 

Green

Bridge board connected to backplane*

 

 

 

Installed HDD is in good condition

 

 

*SCSI Access Fault-Tolerant Enclosure

 

The Power, HDD Access, and Message LEDs are visible even if the system front bezel is closed.

1-8

Chapter 1: Product introduction