2.10.4 Power supply module

You MUST disconnect all power cable plugs from the motherboard and other installed devices before removing the power supply.

The picture below shows the motherboard and device connectors where the power plugs are connected. Refer also to Appendix at the end of this document for details on the power supply.

4

2

3

1 5

120-1 pin ATX (motherboard power connector; hidden)

24-pin +12V (motherboard power connector)

32 x 4-pin plugs (SATA backplane; hidden)

44-pin plug (optical drive)

54-pin plug (floppy disk drive; hidden)

2-36

Chapter 2: Hardware setup