2.10.7 Chassis footpads and roller wheels
The barebone server system is shipped with four footpads attached to the bottom of the chassis for stability. You need to remove these footpads if:
•if you want to replace the footpads with the bundled roller wheels
•you wish to install the system to a rack
(Refer to “Chapter 3 Installation options” of this user guide, and to the “Rackmount Kit” user guide for instructions)
To remove the footpads:
1.Lay the system chassis on its side.
2.Use a flat screwdriver to flip out the top layer of a footpad.
3.Remove the footpad by rotating it counterclockwise.
4. Repeat steps 2 and 3 to remove the other three footpads.
ASUS |