Installing a Serial ATA hard disk drive to the HDD cage
To install a Serial ATA hard disk drive to the hard disk drive cage:
1.Follow intsructions 1 to 6 of the previous section.
2.Connect the 15-pin SATA power plug to the power connector at the back of the drive.
3.Connect the other end of the SATA power cable to a 4-pin plug (female) from the power supply unit.
4.Connect one end of the supplied 7-pin SATA cable to the SATA connector at the back of the drive, then connect the other end to a SATA connector on the motherboard. Refer to the motherboard user guide for the location of the SATA connectors.
ASUS AP130-E1 barebone server | 2-21 |
