2.3Removing the cover

A screw located on the rear panel secures the chassis cover.

Follow these steps to remove the chassis cover.

1.Turn the screw counterclockwise to release the cover. Set the screw aside.

Screw

2.Place your hands on both corners of the front panel, just beside the CD-ROM frame. Push on the CD-ROM area with your thumbs until the cover tilts forward.

The CD-ROM is an optional item.

If your system did not come with a CD-ROM, you can release the cover by placing your hands underneath the front panel edge, then push the inner chassis with your thumbs while pulling the panel with your other fingers.

3.While supporting the front panel with one hand, place your other hand on the top rear edge of the cover and carefully lift the cover from the chassis.

ASUS Terminator 1 C3 barebone system

2 - 3