2.7Installing an optical drive

An optical drive is an optional item in this barebone system. Refer to the instructions in this section if you acquired a model without an optical drive.

Follow these steps to install a

CD-ROM drive.

1.Place the chassis upright.

2.Insert the optical drive into the upper 5.25-inch drive bay.

5.25-inch drive bay

3.Carefully push the CD-ROM drive into the bay until its screw holes align with the holes on the bay as shown.

4.Secure the CD-ROM with two screws as shown.

5.Repeat steps 3 and 4 to install a second optical drive into the lower 5.25-inch drive bay.

CD-ROM screws

ASUS Terminator 1 C3 barebone system

2 - 11