5.Connect a power cable from the power supply to the power connector at the back of the optical drive. Use the cable with the white connector.

6.Connect one end of the IDE ribbon cable to the IDE interface at the back of the CD-ROM, matching the red stripe on the cable with Pin 1 on the IDE interface.

7.Connect one end of the CD-ROM audio cable to the

4-pin connector at the back of the CD-ROM.

8.Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard.

9.Connect the other end of the audio cable to the black 4-pin connector labeled CD on the motherboard.

Optical drive audio cable

IDE ribbon cable

Red stripe to Pin 1

Powe r cable

Secondary

IDE connector (SEC _ IDE)

CD-ROM connector ( C D )

2 - 12

Chapter 2: Basic Installation