7.APPENDIX

7.1ASUS LCD-I Controller Module

The ASUS LCD-I controller module allows you to connect a digital flat panel to your PC. This controller module transmits sharp, bright images by eliminating digital -to-analog and analog-to-digital conversions, which can accumulate noise and degrade image quality.

7.1.1 Installation Procedure

1.You must have an ASUS motherboard with a pair of LCD-TV headers.

2.Align the LCD-I module’s LCDTV0 and LCDTV1 connectors over the motherboard’s LCD-TV headers, and press firmly.

3.Connect the digital LCD cable from the LCD and serial combination bracket to the DFP connector on the LCD-I module.

4.Secure the bracket to the system chassis with a screw.

5.Plug the signal cable of your digital flat panel into the DFP connector on the bracket (as shown below).

(Front V iew)

 

DFP

Digital

Connector

to LCD-I Card

 

Flat

 

Panel

LCD-I Module

 

LCDTV0

 

to COM2 Header

 

LCDTV1

 

(Back V iew)

 

Using the LCD-I Controller Module

NOTE: The LCD-I controller module can work with your LCD panel without any driver. However, if you want to have full-screen display, please set up the VGA driver that comes with your motherboard’s support CD.

ASUS LCD-I Module

7. APPENDIX

ASUS CUW(E)-FX User’s Manual

113