SETUP H/W .3

Connectors

3.HARDWARE SETUP

23)Headphone True-Level Line Out Header (3-pin SPKR)

This header allows you to connect a chassis mounted headphone to the mother- board instead of having to attach an external headphone to the ATX connectors.

SPKR

LINEOUT_LEFT

GND LINEOUT_RIGHT

1

3

CUW(E)-FX

CUW(E)-FX Internal Speaker Connector

24)Chassis Intrusion Lead (2-pin ACHA)

This lead is for a chassis designed for chassis intrusion detection. After-market toggle switches may also be installed to the chassis panel or on any removable components. Two wires should be available from the chassis to connect to this lead. When any chassis component is removed, the contact should open and the motherboard will record a chassis intrusion event. The event can then be pro- cessed by software such as LDCM. If the chassis intrusion lead is not used, a jumper cap must be placed over the pins to close the circuit.

ACHA

CUW(E)-FX

CUW(E)-FX Chassis Open Alarm Lead

38

ASUS CUW(E)-FX User’s Manual