3.HARDWARE SETUP

16)Serial and Consumer IR Connectors (10-pin IR_CON)

This connector supports an optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature. You must also configure the setting through UART2 Use In- frared (see 4.4.2 I/O Device Configuration) to select whether UART2 is di- rected for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard’s SIR connector according to the pin definitions. An optional consumer infrared (CIR) set con- nects to the CIR and SIR connectors simultaneously for both wireless transmit- ting and remote control functions through one external infrared module. Wake On PS2 KB/Mouse in 4.5.1 Power Up Control must be Enabled in order to use Consumer Infrared (CIR) power up.

IR_CON

Standard Infrared (SIR)

SIR

CIR

Front View Back View

 

 

IRTX

CIR+5V

 

 

GND

CIRRX

 

 

IRRX

 

 

 

(NC)

GND

 

 

+5V

(NC)

 

 

CUW(E)-FX

 

IRTX

+5V

 

 

GND

(NC)

 

 

 

IRRX

CUW(E)-FX Infrared Module Connector

17)Serial COM 2 Port Header (10-1 pin COM2)

The optional serial port bracket can be used to add a serial port for additional serial devices.

COM2

Pin 1

CUW(E)-FX

CUW(E)-FX Serial Port Header

H/W SETUP

Connectors

3.

 

 

 

ASUS CUW(E)-FX User’s Manual

35