Asus CUW(E)-FX Setting, Setting CODEC, 2)PCI 3 Volt Setting (PCI3VSBSEL)

SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

1)Onboard Audio Codec Setting (CODEC) available on audio model only

The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using a PCI audio card on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this section). If using a PCI audio expansion card, Onboard AC’97 Audio Con- troller in 4.4.2 I/O Device Configuration must also be disabled.

Setting CODEC

Enable		[1-2] [1-2] [1-2] [1-2] (default)
Disable		[2-3] [2-3] [2-3] [2-3]
		SPK	AUD EN1	SPK	AUD EN1
		3		3
		2		2
		1	EN2AUD	1	EN2AUD
	CUW(E)-FX	ADN#		ADN#
		Enable		Disable
CUW(E)-FX Audio Codec Setting

2)PCI 3 Volt Setting (PCI3VSBSEL)

This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to Enable 3 VSB.

Setting	PCI3VBSEL
+3 VSB	[1-2] (default)
+3 Volt	[2-3]

PCI3VSBSEL

1 2 3 1 2 3

CUW(E)-FX

+3 VSB +3 Volt

CUW(E)-FX PCI 3 Volt Selection

18 ASUS CUW(E)-FX User’s Manual