Asus D2X user manual Configuration and Test with Rmaa

10.2Configuration and Test with RMAA

Start RMAA and follow the setup procedure below.

1.Select both of the playback/recording devices as “ASUS Xonar D2X Audio”.

2.Select 24bit and 48KHz for the test signals. (If you change the format here, please remember to go back to set the same sample rate output in the Xonar D2X Audio Center)

1 2

3.Click “Test options” button in RMAA and check “Analyze noise and distortion only in 20Hz-20KHz range” (audio in-band for human hearing) in the General tab.

3

64 ASUS Xonar D2X