ATA(PI) 80Pin Cable Detection [Host & Device]

Allows you to select the mode for detecting 80-pin ATA(PI) cable. Configuration options: [Host & Device] [Host] [Device]

4.3.5Primary/Third/Fourth IDE Master/Slave

The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press <Enter> to display the IDE device information.

 

 

 

 

 

 

BIOS SETUP UTILITY

 

 

 

 

 

Main

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Primary IDE Master

 

 

Disabled: Disables LBA

 

 

 

 

 

 

 

 

Mode.

 

 

 

 

 

 

 

 

 

 

 

 

Device

:Hard Disk

 

 

Auto: Enables LBA

 

 

Vendor

:xxxxxxxxx

 

 

Mode if the device

 

 

Size

:xx.xGB

 

 

supports it and the

 

 

LBA Mode

:Supported

 

 

device is not already

 

 

Block Mode:16Sectors

 

 

formatted with LBA

 

 

PIO Mode

:4

 

 

Mode disabled.

 

 

Async DMA

:MultiWord DMA-2

 

 

 

 

 

 

Ultra DMA :Ultra DMA-6

 

 

 

 

 

 

S.M.A.R.T.:Supported

 

 

 

 

 

 

Type

 

[Auto]

←→

Select Screen

 

 

LBA/Large Mode

[Auto]

↑↓

Select Item

 

 

Block(Multi-sector Transfer)

[Auto]

+-

Change Option

 

 

PIO Mode

 

[Auto]

F1

General Help

 

 

DMA Mode

 

[Auto]

F10

Save and Exit

 

 

S.M.A.R.T.

 

[Auto]

ESC

Exit

 

 

32Bit Data Transfer

[Enabled]

 

 

 

 

 

 

 

 

 

 

 

 

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and S.M.A.R.T. monitoring). These values are not user-configurable. These items show N/A if no IDE device is installed in the system.

Type [Auto]

Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate IDE device type. Select [CDROM] if you are specifically configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.

Configuration options: [Not Installed] [Auto] [CD/DVD] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]

ASUS DSEB-DG Series

4-11