South Bridge Configuration

The SouthBridge Configuration menu allows you to change the Southbridge settings.

BIOS SETUP UTILITY

Advanced

South Bridge Chipset ConfigurationESB2 Bus-M PCI-X Hub

configuration options.

ESB2 PCI-X Hub Configuration

ESB2 PCI-X Hub Configuration

BIOS SETUP UTILITY

Advanced

Configure advanced settings for ESB2 PCI-X Hub

PCI Bus Frequency

[Auto]

I/O Port Decode

[4K Decode]

RAS Sticky Error Handling

[Clear Errors]

VGA 16-Bit Decode

[Enabled]

This question will allow to select the maximum PCI bus speed to be programmed. Default will always be set to AUTO where bus speed will be decided based on the capabilities of the device on that bus.

←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit

V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

PCI Bus Frequency [Auto]

Allows you to select the PCI bus speed. When you set this item to [Auto], the device will run at the speed based on its capability.

Configuration options: [Auto] [33 Mhz PCI] [66 Mhz PCI] [66 Mhz PCI-X M1] [100 Mhz PCI-X M1] [133 Mhz PCI-X M1] [66 Mhz PCI-X M2]

[100 Mhz PCI-X M2] [133 Mhz PCI-X M2]

I/O Port Decode [4K Decode]

Allows you to select the decode range for I/O ports.

Configuration options: [4K Decode] [1K Decode]

RAS Sticky Error Handling [Clear Errors]

Allows you to select the method of handling the Sticky RAS errors. Configuration options: [Clear Errors] [Leave Errors]

VGA 16-Bit Decode [Enabled]

Allows you to enable or disable the decoding of VGA for the devices behind PXH. Configuration options: [Disabled] [Enabled]

ASUS DSEB-DG Series

4-19