LED Indicators
This LED | Should be |
POWER | Solid green to indicate that the device is turned on. If this light is not on, |
| check if the power cord is attached to the switch and if it is plugged into a |
| power source. |
STATUS of | Solid green/amber to indicate that the device can communicate with your |
10/100 ports | LAN or flashing when the device is sending or receiving data from your LAN |
| computer. |
STATUS of | Solid green to indicate that the device can communicate with your LAN or |
Gigabit ports | flashing when the device is sending or receiving data from your LAN |
(GigaX 1024P only) | computer. |
| Table 3.1 LED Indicators |
3.3 Management from CNM
In Part 3, start the CNM program and manage the switch to meet your network requirements. Before starting CNM, make sure that your manage station is attached to the same network as the switch is. Otherwise, CNM will not be able to discover the switch.
Note: This version of CNM only manages the switches in the same network.
3.3.1 Switch Discovery and Management
1.Make sure that the switch is powered ON and that the CNM is installed on the management station.
2.Click on the CNM shortcut icon in the desktop of the manage station to start the CNM application. CNM will display a window as shown below.
10 | GigaX Smart Switch Centralized Network Management |