Asus E3746 STRIKER II EXTREME, STRIKER II EXTREME, STRIKER II NSE IEEE 1394 connector, 5.IEEE 1394a port connector (10-1pin IE1394_2)

5.IEEE 1394a port connector (10-1 pin IE1394_2)

This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.

TPA2- GND TPB2- +12V GND

STRIKER II EXTREME	IE1394_2
	PIN 1
	TPA2+ GND TPB2+ +12V

STRIKER II EXTREME/

STRIKER II NSE IEEE 1394 connector

Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard!

You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and then install the Q-Connector (1394) to the 1394 connector onboard.

6.Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)

These connectors are for temperature monitoring. Connect the thermal sensor cables to these connectors and place the other ends to the devices which you want to monitor temperature. The optional fan1/2/3 can work with the temperature sensors for a better cooling effect.

STRIKER II EXTREME

TemperatureGround

OPT_TEMP1

TemperatureGround

OPT_TEMP2

TemperatureGround

OPT_TEMP3

STRIKER II EXTREME/

STRIKER II NSE Thermal sensor cable connectors

Enable OPT1/2/3 Cable Overheat Protection in BIOS if you connect thermal sensor cables to these connectors. Refer to page 4-35 for details.

ROG Striker II Extreme / Striker II NSE 2-35