Asus E3746 LDT Frequency [5x], PCIE Bus, Slot 1 & 2, MHz [100], PCIE Bus, Slot 3, MHz [100], Memory Timing Setting, FSB-Memory, Clock Mode, Actual MEM (DDR), MHz

The following item becomes configurable when you set FSB-Memory Clock Mode to [Unlinked].

MEM (DDR), MHz [800]

Allows you to adjust memory frequency. Use the <+> and <-> keys to adjust the frequency. You can also type the desired frequency using the numeric keypad. The values range from 800 to 3000.

Due to NVIDIA® chipset features, ASUS BIOS will automatically adjust your assigned frequency to an approximate value to achieve the optimal results.

Actual MEM (DDR), MHz

This item reflects the actual frequency after the system reboots.

LDT Frequency [5x]

Configuration options: [1x] [2x] [3x] [4x] [5x]

PCIE Bus, Slot 1 & 2, MHz [100]

Allows you to set the PCIEX16_1/2 overclocking frequency. Use the <+> and <-> keys to adjust the frequency. The values range from 100 to 200.

PCIE Bus, Slot 3, MHz [100]

Allows you to set the PCIEX16_3 overclocking frequency. Use the <+> and <-> keys to adjust the frequency. The values range from 100 to 200.

Memory Timing Setting

Extreme Tweaker

Phoenix-AwardBIOS CMOS Setup Utility

	Memory Timing Setting			Select Menu
Parameters		Setting	Current	Item Specific Help
tCL (CAS Latency)		[Auto]	6	CAS# latency (CAS# to
tRCD		[Auto]	6
tRP		[Auto]	6	read data valid)
tRAS		[Auto]	15
Command Per Clock (CMD)		[Auto]	2T	Set Memory timings
** Advanced Memory Settings **
				to [Optimal] to use
tRRD		[Auto]	4	the value recommended
tRC		[Auto]	21	by the DIMM’s
tWR		[Auto]	7	manufacturer.
tWTR		[Auto]	13
tFAW		[Auto]	17
tREF		[Auto]	7.6uS
F1:Help	↑↓ : Select Item	-/+: Change Value		F5: Setup Defaults
ESC: Exit	→←: Select Menu	Enter: Select SubMenu		F10: Save and Exit

The currently detected values are shown under the “Current” field.

tCL (CAS Latency) [Auto]

Configuration options: [Auto] [5] [6]–[18]

ROG Striker II Extreme / Striker II NSE 4-15