Write Data Timing Control [Auto]

Configuration options: [Auto] [No Delay] [1/96 MEMCLK delay] [2/96 MEMCLK delay]� [3/96 MEMCLK delay]�–[46/96 MEMCLK delay]� [47/96 MEMCLK delay]�

DQS Receiver Enable Timing [Auto]

Configuration options: [Auto] [0 ps] [50 ps] [100 ps] [150 ps]–[8650 ps] [8700 ps]

Output Driver Control

CKE Drive Strength [Auto]

Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]

CS/ODT Drive Strength [Auto]

Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]

Add/CMD Drive Strength [Auto]

Configuration options: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]

MEMCLK Drive Strength [Auto]

Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]

Data Drive Strength [Auto]

Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]

DQS Drive Strength [Auto]

Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]

DRAM Drivers Weak Mode [Auto]

Configuration options: [Auto] [Normal] [Weak]

Current DRAM Timing

This value is detected automatically.

SLI-Ready Memory [Disabled]

Allows you to select SPD profile for SLI-Ready Memory

Configuration options: [Disabled] [Optimal] [High Performance] [High Frequency]

The following item becomes configurable when you set SLI-Ready Memory to options other than [disabled]�.

SLI-Ready Memory CPUOC [CPUOC 0%]�

Allows you to select CPU overclocking percentage. Configuration options: [CPUOC 0%] [CPUOC 1%] [CPUOC 2%]– [CPUOC 13%]� [CPUOC 14%]� [CPUOC MAX]�

Vcore Voltage [Auto]

Allows you to select the Vcore (CPU) voltage. The text color in the configuration field corresponds to the onboard CPU LED color, both of which indicate voltage condition. Refer to page 2-1 for CPU LED definition.

Configuration options: [Auto] [0.7750V] [0.7875V] [0.8000V] [0.8125V]�–��������[1.9750V]��[1.9875V]� [2.0000V]�

4-18

Chapter 4: BIOS setup