4.4.6SATA 1–4

While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information.

Phoenix-AwardBIOS CMOS Setup Utility

Main

 

SATA 1

 

Select Menu

 

 

 

 

Extended IDE Drive

[Auto]

 

Item Specific Help

Access Mode

[Auto]

 

Selects the type of

 

 

 

Capacity

0

MB

fixed disk connected to

 

 

 

the system.

Cylinder

0

 

 

Head

0

 

 

Landing Zone

0

 

 

Sector

0

 

 

 

 

 

 

F1:Help

↑↓ : Select Item

-/+: Change Value

F5: Setup

Defaults

ESC: Exit

→←: Select Menu

Enter: Select SubMenu

F10: Save

and Exit

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Landing Zone and Sector). These values are not user- configurable. These items show 0 if no SATA device is installed in the system.

Extended IDE Drive [Auto]

Selects the type of fixed disk connected to the system.

Configuration options: [None] [Auto]

Access Mode [Auto]

Sets the sector addressing mode. Configuration options: [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

Capacity

Displays the auto-detected hard disk capacity. This item is not configurable.

Cylinder

Shows the number of the hard disk cylinders. This item is not configurable.

Head

Shows the number of the hard disk read/write heads. This item is not configurable.

Landing Zone

Shows the number of landing zone per track. This item is not configurable.

ASUS Crosshair II Formula

4-25