3.HARDWARE SETUP

3.3Hardware Setup Procedure

Before using your computer, you must complete the following steps:•Check Motherboard Settings•Install Memory Modules•Install the Central Processing Unit (CPU)•Install Expansion Cards•Connect Ribbon Cables, Panel Wires, and Power Supply

3.4Motherboard Settings

This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers.

WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.

1.Unplug your computer when working on the inside.

2.Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.

3.Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components.

4.Place components on a grounded antistatic pad or on the bag that came with the compo- nent whenever the components are separated from the system.

5.Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard.

Motherboard Feature Settings (DSW)

Besides jumper settings, some of the motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position.

 

DSW

 

 

ON

ON

 

1 2 3 4

OFF

K7V

1. Frequency Selection

 

2. Frequency Selection

 

3. Frequency Selection

 

4. Frequency Selection

K7V DIP Switches

 

 

.3 SETUPH/W

Motherboard Settings

ASUS K7V User’s Manual

17