.3

H/WConnectors

SETUP

3.HARDWARE SETUP

16)Serial Infrared Module Connector (5-pin IR)

This connector supports an optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through 4.4.5 Peripheral Setup to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown in Back View and connect a ribbon cable from the module to the motherboard’s IR connector according to the pin definitions.

 

IR

Front View

Back View

 

 

 

 

 

1

 

 

 

 

+5V

IRRX GND

IRTX

 

 

K7V

 

 

IRTX

+5V

 

 

 

GND

(NC)

 

 

 

IRRX

 

K7V Infrared Module Connector

17)SMBus Connector (5-1 pin SMB)

This connector allows you to connect SMBus (System Management Bus) de- vices. SMBus devices communicate by means of the SMBus with an SMBus host and/or other SMBus devices. SMBus is a specific implementation of an I2C bus, which is a multi-device bus; that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer.

SMBCLK

Ground SMBDATA +5V

K7V

1

SMB

K7V SMBus Connector

42

ASUS K7V User’s Manual