Asus K7V NOTE:, NOTE:, CPU Frequency, 4.4 Advanced Menu, 3.5 System Memory (DIMM), Operating Frequency Setting, 5)CPU External Frequency Setting (DSW), User Define

SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

5)CPU External Frequency Setting (DSW)

This option tells the clock generator what frequency to send to the CPU, SDRAM, and the chipset. This allows the selection of the CPU’s External frequency. The CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s Internal frequency (the advertised CPU speed).

IMPORTANT:

1. To use this feature, JEN [see 1) JumperFree™ Mode (JEN) in 3. HARDWARE SETUP] must be set to Jumper mode or Disable [1-2].

2.In JumperFree mode, all dip switches (DSW-1–DSW-4) must be set to OFF.

3.When JumperFree mode is enabled, use BIOS setup in place of these switches (set Operating Frequency Setting to User Define under 4.4 Advanced Menu in BIOS Setup so you can set the CPU Frequency).

	DSW
			ON					ON
		1		2	3	4	1		2	3	4
	CPU		100.00MHz					103.00MHz
	PCI		33.33MHz					34.33MHz
			ON					ON
K7V
							1		2	3	4
		1		2	3	4
	CPU		105MHz					110.00MHz
	PCI			35MHz				36.67MHz

K7V CPU External Frequency Selection

NOTE: Frequency Multiple settings are not available here because AMD Athlon™ processors have locked Frequency Multiples.

NOTE: The motherboard supports PC100 / PC133 DIMMs or VC SDRAMsfor system memory. Registered DIMMs are not supported (see 3.5 System Memory (DIMM).

20 ASUS K7V User’s Manual