Removing the side cover and front panel assembly
1.Remove the cover screws on the rear panel.
2.Pull the side cover toward the rear panel until its hooks disengage from the chassis tabs. Set the side cover aside.
3.Locate the front panel assembly hooks, then lift them until they disengage from the chassis.
4.Swing the front panel assembly to the right, until the
5.Remove the front panel assembly, then set aside.
|
| 4 |
|
| 3 |
Air duct | 1 | 4 |
|
| |
| 2 | 3 |
| 1 | 4 |
|
| |
| 2 | 3 |
Chassis tab holes |
| |
|
| 4 |
Installing a CPU
To install a CPU:
1.Locate the CPU socket,then lift the socket lever to a 90º-
100º angel.
Installation
manual
