7
Installing the NJ205 IntelliJack consists of the following steps:
1Set up the power supply.
2Mount the NJ205 to the wall outlet box.
3Connect devices to the NJ205.
4Check the NJ205 LEDs.
Setting up the Power Supply
Power to the IntelliJack is provided through one of the following
methods:
■Over the network via an integrated switch that supports
Power Over Ethernet.
■Over the network via an Ethernet multi-port endspan power
supply.
■Over the network via a single-port Ethernet power supply.
■Locally via a 3Com local power supply.
NOTE: Power Over Ethernet, also known as in-line
power, is a method to provide power to equipment over
an Ethernet cable, allowing a device to receive both data
and power from the same network cable. The NJ205 is
ideally powered by a switch that is IEEE802.3af-
compliant. The NJ205 can also be powered by some
switches that are not 802.3af-compliant. Consult the
3Com web site for more information.
2Installing the IntelliJack