Using Ethernet Multi-port Midspan Power Supply
Using Ethernet Multi-port Midspan Power Supply
To use an Ethernet multi-port midspan power supply, you must connect the power supply to your network, as shown in the illustration on page 68.
The Ethernet multi-port midspan power supply from 3Com connects to an existing Ethernet or Fast Ethernet infrastructure with standard Category 5 or better cabling, and powers up to 24 IntelliJack devices. For complete installation instructions, see the Ethernet multi-port midspan power supply documentation located at www.3Com.com.
Connect the network data/voice/power cable to the IntelliJack white cable.
Connect the network second data/voice/power cable (if available) to the IntelliJack black cable.
