3.3Troubleshooting (FAQ)
Problem | Possible Solution |
Power LED is not ON
•Press the 
button to check if the monitor is in the
ON mode.
•Check if the power cord is properly connected to the monitor and the power outlet.
The power LED lights white blinking and there is no screen image
•Check if the monitor and the computer are in the
ON mode.
•Make sure the signal cable is properly connected the monitor and the computer.
•Inspect the signal cable and make sure none of the pins are bent.
•Connect the computer with another available monitor to check if the computer is properly working.
Screen image is too light or dark
•Adjust the Contrast and Brightness settings via OSD.
Screen image is not centered or sized properly
•Press the
button for two seconds to automatically adjust the image.
•Adjust the
OSD.
Screen image bounces or a wave | • Make sure the signal cable is properly connected to |
pattern is present in the image | the monitor and the computer. |
| • Move electrical devices that may cause electrical |
| interference. |
Screen image has color defects | • Inspect the signal cable and make sure that none of |
(white does not look white) | the pins are bent. |
| • Perform All Reset via OSD. |
| • Adjust the R/G/B color settings or select the Color |
| Temperature via OSD. |
Screen image is blurry or fuzzy
No sound or sound is low
•Press the
button for 2~4 seconds to automatically adjust the image (for VGA input only).
•Adjust the Phase and Clock settings via OSD.
•Ensure that the audio cable is properly connected to the monitor and the computer.
•Adjust the volume settings of both your monitor and computer.
•Ensure that the computer sound card driver is properly installed and activated.
ASUS LED Monitor ML229H Series |
