5.4.1Configuring the SCSI controller
You need to configure the SCSI controller before creating a RAID set. After selecting the SCSI channel to use, the utility prompts you to select from the available options. Use the arrow keys to select Configure/View SCSI Controller Settings, then press <Enter>.
5.4.2Enabling the HostRAID controller
To enable the Adaptec HostRAID controller:
1.Use the arrow keys to select the HostRAID item in the Configuration section.
2.Press <Enter> to set the item to Enabled.
3.Press <Esc> to exit.
4.When the utility prompts you to save the changes, select Yes, then press <Enter>.
5 - 28 | Chapter 5: RAID configuration |