2.The utility displays the installed SCSI hard disk drives status and menu options. When available, the HDD status shows Free. Press <C>.

The utility does not display an installed SCSI HDD(s) with an existing RAID condiguration or is part of an existing RAID set. Use the SCSI Disk Utilities to reformat the HDD(s), or use the previous RAID card to clear the RAID configuration on the HDD(s).

3.Select RAID-0 (High Performance, No Fault Tolerance) from the Select RAID Type menu, then press <Enter>.

Refer to the Striping Requirements note at the bottom of the screen to determine the number of hard disk drives required for the selected RAID type.

5 - 30

Chapter 5: RAID configuration