5.When prompted, insert the Red Hat® Enterprise ver. 3.0 RAID driver disk to the floppy disk drive, select OK, then press <Enter>.

The drivers for the RAID controller are installed to the system.

6.When asked if you will load additional RAID controller drivers:

•For NCLV-DS2 model, select Yes, then install the additional RAID controller drivers for the Adaptec® AIC-7901X.

•For NCLV-D2/SATA model, select Yes, then install the additional RAID controller drivers for the Adaptec® AIC-8130.

7.Follow screen instructions to continue the OS installation.

ASUS NCLV-D2 Series

6 - 9