Asus NCLV-D2 Series Yes, RAID-1, RAID-1, Create new, Create a New, Copy from ( 0) to ( 1), Copy from ( 1) to ( 0)

6.Select Create new RAID-1from the RAID-1 Build Option menu, then press <Enter>. Refer to the options description below.

•Create a New RAID-1- The default option. Select this option when creating a new RAID 1 set.

•Copy from ( 0) to ( 1) - Select this option when you want to copy the source drive contents to a target drive, provided that the source is equal to or smaller than the target drive.

•Copy from ( 1) to ( 0) - Select this option when you want to copy the source drive contents to a target drive, provided that the source is larger than the target drive.

7.When prompted, use the keyboard to assign a name for the RAID 1 set, then press <Enter>.

8.If you want to make the array bootable, select Yes from the menu, then press <Enter>.

9.When prompted to create the RAID 1 set, select <Yes>, then press <Enter>.

The utility erases all data from the selected hard disk drives. Make sure to backup all important data before creating a RAID set.

10.When a confirmation dialogue box appears, select <Yes>, then press <Enter>.

5 - 34 Chapter 5: RAID configuration