III. INSTALLATION

Installing the Pentium II Processor

1.Connect the Heat Sensor Cable to JP4/JP5 (optional): If you purchased the specially designed fan and thermal monitor heatsinks, you may connect the heat sensor cables to the motherboard’s CPU heat sensor connectors (JP4/JP5) now.

NOTE: If you are installing only one processor, you may use JP5 to connect a heat sensor cable to monitor the power supply temperature to make sure that it is operating at a safe heat level. This feature is available only with the hardware monitor installed.

JP4

Heat Sensor Connector for CPU 1

JP5

Heat Sensor Connector for CPU 2

P2B-D/DS CPU Heat Sensor Connectors

2.Insert the Attach Mount Screws: Insert the screws through the motherboard’s underside at the location indicated. Press the screws gently but firmly until it is fully inserted. Do not rock the screws side to side, instead press the screws straight into the holes.

Rib

 

Single Edge Contact Slot for CPU 1

NOTE: Insert the

 

screws into the

JP4

 

 

 

 

 

 

encircled areas.

 

JP5

 

 

Rib

 

Single Edge Contact Slot for CPU 2

 

F_PWR

Intel 440BX AGPset

20

ASUS P2B-D/P2B-DS User’s Manual