IX. ADAPTEC EZ-SCSI

Welcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Adaptec EZSCSI gives you what you need to use DOS, Windows® 3.1x, or Windows for Workgroups3.1x.

Note: The ADAPTEC EZ-SCSI UTILITY does not provide drivers for Windows® 95 and WindowsNT™.

Quick Start Instructions

First, install SCSI devices (see the hardware documentation for details). Then follow the instructions for your operating system software in one of the following sec- tions. We recommend that after you install Adaptec EZSCSI, you run SCSITutor to learn more about the features of SCSI.

Windows95 or WindowsNT

If you want to install Windows95 or WindowsNT on a new computer system, you may not be able to access your SCSI CDROM drive at first. (Usually, you install Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM drive, follow the DOS Quick Start instructions.

Windows/Windows for Workgroups 3.1x

1Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on your computer.

2Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.3Select File/Run from the Program Manager menu.

4When the Run dialog box appears, type a:\setup if you are using the A drive or b:\setup if you are using the B drive. Then click OK.

5Follow the onscreen instructions.

DOS

1Install DOS 6.x or later and start it running on your computer.

2Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.

3At the DOS prompt, type a:\install (assuming your 3.5” floppy is A: drive). Then press <Enter>.

4Follow the onscreen instructions.
Intro/Quick Start

IX. EZ-SCSI UTILITY

ASUS P2B-D/P2B-DS User’s Manual

67