3.HARDWARE SETUP

3.6.3Installing the Processor

1. Unlock the URM’s Folding Support Arms: The folding support arms of the URM are

locked when shipped.Locked Folding

Support Arms

To unlock the support arms, simply flip them up to an upright position.
The URM is now ready for the installation

Unlocked Folding

Support Arms

of your processor.2.Attach the Heatsink

NOTE: If provided, you should follow the heatsink attachment instructions that came with your heatsink or processor. The following steps are provided only as a general guide and may not reflect those for your heatsink.

Using the SECC fan with the Pentium® II Lock Arm

Lock Arm

Push the two lock arms in one direction to clamp the heatsink onto the processor and the other direction to release.

Using the SECC2 fan with the Pentium®

III

Insert the four heatsink’s pins through the
holes of the SECC2. Place the metal clip on
the ends of the pins and slide until it locks

 

 

 

 

into place.

 

 

 

Four Pins and metal clip

NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the SECC2 heatsink and fan except that the clamping design is different.

H/WSETUP

CPU

3.

 

 

 

ASUS P3B-1394 User’s Manual

23