.3 SETUP H/WCPU

3. HARDWARE SETUP

WARNING! Make sure the heatsink is mounted tightly against the SECC2, SECC, or SEPP; otherwise, the CPU will overheat. You may install an auxiliary fan to provide adequate circulation across the processor’s passive heatsink.

3.Insert the SECC2/SECC/SEPP

SECC with Pentium® II only: Push the SECC’s two locks inward until you hear a click (the picture in step 2 shows the locks in the outward position and inward in the picture below).

With the heatsink facing the motherboard’s chipset, push the SECC2, SECC, or SEPP gently but firmly into the Slot 1 connector until it is fully inserted.

SECC

SECC2/SEPP

Push lock inward

CPU fan cable to

CPU fan cable to

fan connector

fan connector

4.Secure the SECC2/SECC/SEPP

Secure the SECC2/SECC/SEPP in place by pushing the SECC2/SECC/SEPP until it is firmly seated on the Slot 1 connector.

SECC with Pentium® II only: The SECC locks should be outward when se- cured so that the lock shows through the retention mechanism’s lock holes.

SECC

SECC2/SEPP

Lock hole

 

 

 

Lock hole

CPU fan

 

 

CPU fan cable to

 

cable to fan

fan connector

 

connector

24

ASUS P3B-1394 User’s Manual