3.HARDWARE SETUP

12)Wake-On-LAN Connector (3-pin WOL_CON)

The WOL_CON connector powers up the system when a wake-up packet or signal is received from the network through the ASUS PCI-L101 LAN card.

IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see

4.6Power Management Setup) and that your system has an ATX power supply with at least 720mA +5V standby power.

.3

H/WConnectors

SETUP

WOL_CON

Ground

P3B-1394

+5 VSB PME

P3B-1394 Wake-On-LAN Connector

13)Wake-On-Ring Connector (2-pin WOR)

This connector connects to an internal modem card with a Wake-On-Ring out- put. The connector powers up the system when a ringup packet or signal is re- ceived through the internal modem card. NOTE: For external modems, Wake- On-Ring is detected through the COM port.

IMPORTANT: This feature requires that PWR Up On Modem Act is set toEnabled (see 4.6 Power Management Setup).

Pin 1 Ground

Pin 2 PIXRI#

WOR

P3B-1394

P3B-1394 Wake-On-Ring Connector

34

ASUS P3B-1394 User’s Manual