4.Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2)

These Serial ATA connectors support SATA hard disks that you may configure as a RAID set. With the onboard SiS 180 RAID controller, you may create a RAID0, RAID1, or RAID0+1configuration. See Chapter 5 for details on RAID configuration.

P4R800-V DELUXE

GND

RSATA_TXP2

RSATA_TXN2

GND

RSATA_RXP2

RSATA_RXN2

GND

SATA_RAID2

GND

RSATA_TXP1

RSATA_TXN1

GND

RSATA_RXP1

RSATA_RXN1

GND

SATA_RAID1

P4R800-V DELUXE SATA Connectors

If you wish to create a RAID set, make sure that you have connected the SATA cable and installed Serial ATA devices.

5.RAID ATA133 connector (40-1 pin PRI_RAID)

The SiS 180 RAID controller supports this connector for RAID 0, RAID 1, or RAID 0+1 configuration. You can connect two UltraATA133 hard disks to this connector and set up a disk array configuration. See Chapter 5 for details on the RAID configuration.

P4R800-V DELUXE

P4R800-V DELUXE RAID Connector

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

PIN 1

RAID_

PRI

If you wish to create a RAID set using UltraATA hard disks, make sure that you have connected the UltraATA cable and installed UltraATA 133 hard disks.

ASUS P4R800-V Deluxe motherboard user guide

2-23