POST Message

 

Action

System failed due to CPU

• Check your CPU settings in BIOS

 

 

overclocking and make sure you

 

 

only set to the recommended

 

 

settings. See section

 

 

“4.4 Advanced menu.”

 

 

No keyboard detected

• Check your keyboard if properly

 

 

connected to the purple PS/2

 

 

port on the rear panel.

 

• See section “2.7.1 Rear panel

 

 

connectors” for the location of the

 

 

port.

 

 

No floppy disk detected

• Make sure you have connected a

 

 

floppy disk drive to the floppy disk

 

 

drive connector on the motherboard.

 

 

No IDE hard disk detected

• Make sure you have connected an

 

 

IDE hard disk drive to the one of the

 

 

IDE connectors on the motherboard.

 

 

CPU temperature too high

• Check if the CPU fan is working

 

 

properly.

 

 

CPU fan failed

• Check the CPU fan and make sure

 

 

it turns on after you applied power

 

 

to the system.

 

• Make sure that your CPU fan

 

 

supports the fan speed detection

 

 

function.

 

 

CPU voltage out of range

• Check your power supply and

 

 

make sure it is not defective.

 

• Call ASUS technical support for

 

 

assistance. Refer to the ASUS contact

 

 

information.

 

 

 

System completed

No action required

Power-On Self Test

 

 

 

 

 

Computer now booting

No action required

from operating system

 

 

 

 

 

You may enable or disable the ASUS POST Reporter™ by adjusting the Speech IC Reporter BIOS option. See page 4-22 for details.

ASUS P4R800-V Deluxe motherboard user guide

3-3