4.6Boot menu
First Boot Device | Select Menu | |
Second Boot Device | [CDROM] | Item Specific Help |
Third Boot Device | [Floppy] | |
Fourth Boot Device | [Disabled] | Select your boot device |
Plug & Play OS | [Yes] | |
Boot Virus Detection | [Disabled] | priority. |
Quick Power On Self Test | [Enabled] |
|
Boot Up Floppy Seek | [Disabled] |
|
Boot Up NumLock Status | [On] |
|
Full Screen LOGO | [Enabled] |
|
APIC Mode | [Enabled] |
|
F1 | : | Help | ↑↓ : | Select | Item | : | Change | Value | F5 | : | Setup Defaults | |
ESC | : | Exit | →← : | Select | Menu | Enter | : | Select | F10 | : | Save and Exit |
The Boot Menu allows you to select 13 types of boot devices. Promotion or demotion of devices alters the priority which the system uses to boot device on system power up. Configuration options include [Floppy] [LS120]
This field allows you to use a Plug and Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may be reassigned by the OS. If you installed a non- PnP OS or if you want to prevent reassigning of interrupt settings, keep the default setting [No]. Configuration options: [No] [Yes]
Boot Virus Detection [Disabled]Allows you to enable or disable the virus warning feature for IDE hard disk boot sector. When set to [Enabled], BIOS displays a warning message on the screen and an alarm beep if someone attempts to write data on the HDD boot sector. Configuration options: [Enabled] [Disabled]
QuickThis field speeds up the
ASUS |