Asus P4T533 2.5.2 Installing Memory, IMPORTANT:

2.5.2 Installing Memory

The memory module (RIMM) will fit in only one orientation.

IMPORTANT: Do not touch the memory module’s connectors. Handle the module only by the edges.

RIMM Sockets

RIMM with Heat Spreader

P4T533 C-RIMM

P4T533 184-Pin RIMM Sockets

1.Make sure that the notch keys in the module are aligned with the small ribs inside the RIMM sockets.

2.With the ejectors in the open position (as shown), push down gently but firmly on the memory module until it snaps into place. The guides on the socket’s ejectors should go through the two mounting notches on the module and the ejectors should close. If necessary, push the ejectors inward to secure the module in place.

No hardware or BIOS setup is required after adding or removing memory.

ASUS P4T533 motherboard user guide 17