11.Floppy disk drive connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).

FLOPPY

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

P4T533

PIN 1

P4T533 Floppy Disk Drive Connector

12.Power, CPU and Chassis Fan Connectors (Three 3-pin PWR_, CPU_, CHA_FAN)

The two fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin.

Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

PWRFAN

Rotation +12V GND

CPU_FAN

GND

+12V

Rotation

P4T533

CH_FAN

Rotation +12V GND

P4T533 12-Volt Fan Connectors

ASUS P4T533 motherboard user guide

37