Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus P4T533 MHz, CPU, AGP, PCI, DSW1, IMPORTANT:, Frequency Table, ASUS P4T533 motherboard user guide, 2. CPU External Frequency Selection (DSW1 Switches 1-5)

1 136

Download 136 pages, 4.93 Mb

2. CPU External Frequency Selection (DSW1 Switches 1-5)

This option tells the clock generator which frequency to send to the CPU, SDRAM and AGP clock, and sets the CPU’s External frequency. (The BUS Clock multiplied by the Frequency Multiple equals the CPU’s Internal frequency, or, the advertised CPU speed.)

IMPORTANT:

1.To use this feature, JEN must be set to Jumper Mode, [1-2]. (See 1, JumperFree™ Mode.)

DSW1

2 1			ON		2 1			ON		2 1			ON


3					3					3
4					4					4
5					5					5

P4T533

P4T533 CPU

External Frequency Selection

CPU 100.00MHz								105.00MHz							110.00MHz
AGP	67.00MHz							70.00MHz							73.00MHz
PCI	33.00MHz							35.00MHz							37.00MHz

		2 1				ON			2 1				ON			2 1				ON


		3							3							3
		3							3							3
		4							4							4
		5							5							5

CPU 115.00MHz								120.00MHz							133.00MHz
AGP	77.00MHz							80.00MHz							67.00MHz
PCI	38.00MHz							40.00MHz							33.00MHz

		2 1				ON			2 1				ON			2 1				ON


		3							3							3
		4							4							4
		5							5							5

CPU 136.00MHz								140.00MHz							145.00MHz
AGP	68.00MHz							70.00MHz							73.00MHz
PCI	34.00MHz							35.00MHz							36.00MHz

Frequency Table

		MHz				DSW1
	CPU	AGP	PCI	1	2	3	4	5
	100	67	33	[OFF]	[OFF]	[OFF]	[OFF]	[OFF]

	105	70	35	[OFF]	[ON]	[ON]	[OFF]	[OFF]
	110	73	37	[OFF]	[OFF]	[ON]	[OFF]	[OFF]
	115	77	38	[OFF]	[ON]	[OFF]	[ON]	[OFF]
	120	80	40	[OFF]	[OFF]	[OFF]	[ON]	[OFF]
	133	67	33	[OFF]	[OFF]	[OFF]	[OFF]	[ON]
	136	68	34	[ON]	[OFF]	[OFF]	[OFF]	[ON]

	140	70	35	[ON]	[ON]	[ON]	[OFF]	[ON]
	145	73	36	[OFF]	[ON]	[OFF]	[ON]	[ON]

WARNING! Set the CPU AND DRAM frequencies only to the recommended settings. Frequencies other than the recommended CPU bus frequencies are not guaranteed to be stable. Overclocking the processor is not recommended, as it may result in a slower speed.

ASUS P4T533 motherboard user guide

23

Contents

Page P4T533 E1109 Manual August How this guide is organized Conventions used in this guide Contents Chapter 1: Product introduction Chapter 2: Hardware information Chapter 3: Powering up Chapter 4: BIOS setup Chapter 5: Software support Electrical safety Operational safety FCC/CDC statements Federal Communications Commission Statement Canadian Department of Communications Statement This class B digital apparatus complies with Canadian ICES-003 ASUS contact information P4T533 specifications summary Page Page Special Notice ASUS P4T533 motherboard Thank you for buying the ASUS® P4T533 motherboard 1.1Package contents ASUS P4T533 motherboard user guide 1.2Core Specifications Latest P4 Processor Technology North Bridge Chipset: Intel ICH2: Optional Promise 1.3Special Features ASUS EZ Plug™ ASUS EZ Flash BIOS (See page 51.) ASUS POST Reporter™ ASUS MyLogo2™ 1.4Motherboard Components Location 1.4.1 Component Locations 1.5Value-addedsolutions Easy Overclocking USB2.0: Digital Audio: Onboard Audio (optional): Page Page 2.1.1 Placement direction 2.1.2 Screw holes 2.2Motherboard layout 2.2.1 Layout contents 2.3Before you proceed 2.4.1 Overview 2.4.2 Installing the CPU 2.4.3 Installing the heatsink and fan Page 2.4.4 Connecting the CPU fan cable 2.5.1 Overview 2.5.2 Installing Memory 2.5.3 Removing Memory: 2.5.4 General RIMM Memos: 32-bit1066/800MHz RIMM Qualified Vendor List 2.6.1 Installing an expansion card 2.6.2 Configuring an expansion card Standard Interrupt Assignments Interrupt Request Table for this Motherboard 2.6.3 PCI slots 2.6.4 AGP slot Motherboard Frequency Settings (DSW Switches) 1. JumperFree™ Mode (JEN) 4.4 Advanced Menu 2. CPU External Frequency Selection (DSW1 Switches 1-5) IMPORTANT: Frequency Table MHz DSW1 3. CPU Frequency Multiple Setting (DSW Switches 1-4) MultiplierTable MHz Multiplier DSW 4. USB Header (3 pin USB_EN) 5. USB Device Wake-Up(2x3 pin USBPWR_12, 34) 6. Bass Center Setting (2x3 pin BCS1, BCS2) 7. Keyboard Wake Up (3 pin KBPWR) 8. CPU Over Voltage Setting (3 pin OVER_VOLT) 9. Speaker Selector (3 pin SPEECH) 10. RAID IDE Setting (3 pin RAID_SW) 11. Clear RTC RAM (2 pin CLRTC) Page 2.8Connectors WARNING IMPORTANT 1.PS/2 Mouse Port (Green 6-pinPS2KBMS) PS/2 Mouse Function Control 3. Universal Serial Bus Ports: USB 1.1 and USB 2.0 (four x 4-pinUSB) 4.Parallel Port (Burgundy 25-pinPRINTER) Onboard Parallel Port 4.4.2 I/O Device Configuration) 5.Serial Ports (Teal/Turquoise Two x 9-pinCOM1) 6.Audio Connectors (Three 1/8” AUDIO) (optional) Line Out Line In Mic 5. SOFTWARE SETUP 8.IDE Activity LED (2-pinIDE_LED) Page Primary RAID IDE (Blue) / Secondary RAID IDE (Black) IDE Connectors (Two See 5.4 Software Setup 11.Floppy disk drive connector (34-1pin FLOPPY) 12.Power, CPU and Chassis Fan Connectors (Three 3-pinPWR_, CPU_, CHA_FAN) 13.ATX Power Connectors (20-pinATXPWR, 4-pin12V EZ_PLUG, 4- pin ATX12V) 14. SMBus Connector (6-1pin SMB) 15. USB Header (10-1pin USB11_34) 16. USB 2.0 Header (10-1pin USB20_12) 17.Internal audio connectors (Three 4-pinCD, AUX, MODEM) (optional) 18. Chassis Open Alarm Lead (4-1pin CHASSIS) 19. Smart Card Reader Connector (14-1pin SMARTCON) (Optional) 20. Line-outSelector Jumpers (Two 2 pin FP_LO_SWL, FP_LO_SWR) 21. ASUS iPanel / Infrared Connector (24-1pin AFPANEL) 22. Front Panel Audio Line In Header (5 pin LINE_IN) NOTE only 23. Front Panel Audio Connector (10-1pin AAPANEL) 24. Digital Audio Connector (4-1pin SPDIF) (Optional) 25. Game Header (16-1pin GAME) Page Panel Connector (20 pin PANEL) The following diagram illustrates items 27-33: 27. System Power LED Lead (3-1pin PLED) 28. Keyboard Lock Switch Lead (2 pin KEYLOCK) 29. System Warning Speaker Lead (4 pin SPEAKER) Page Page Award BIOS Beep Codes 3.2Vocal POST Messages POST Message Action Chapter 3: Powering up Page 3.3Powering off the computer Page Page 4.1.1 Using ASUS EZ Flash to update the BIOS Page 4.1.2 Using AFLASH from a Floppy Disk 4.1.3 Updating BIOS procedures Page 4.2BIOS Setup program 4.2.1 BIOS menu bar 4.2.2 Legend bar General help Saving changes and exiting the Setup program Scroll bar Sub-menu System Time [XX:XX:XX] System Date [XX/XX/XXXX] Legacy Diskette A [1.44M, 3.5 in.] Floppy 3 Mode Support [Disabled] 4.3.1 Primary & Secondary Master/Slave Type [Auto] [User Type HDD] Translation Method [LBA] Cylinders Head Sector CHS Capacity SMART Monitoring [Disabled] PIO Mode [4] Ultra DMA Mode [Disabled] 4.3.2 Keyboard Features Boot Up NumLock Status [On] Keyboard Auto-RepeatRate [12/Sec] Keyboard Auto-RepeatDelay [1/4 Sec] Language [English] Supervisor Password [Disabled] / User Password [Disabled] A note about passwords Halt On [All Errors] Installed Memory [XXX MB] CPU Speed [Manual] CPU Frequency Multiplier CPU External Frequency (MHz) CPU / Memory Frequency Ratio [Auto] AGP/PCI Frequency Setting [Auto] AGP/PCI Frequency (MHz) [66.66/33.33] CPU VCore Setting [Auto] CPU VCore [1.750V] CPU Level 1 / 2 Cache [Enabled] BIOS Update [Enabled] PS/2 Mouse Function Control [Auto] USB Legacy Support [Auto] OS/2 Onboard Memory > 64M [Disabled] 4.4.1 Chip Configuration RDRAM Turbo Mode Graphics Aperture Size [64MB] Video Memory Cache Mode [UC] Memory Hole At 15M-16M[Disabled] 4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] Onboard Serial Port 1 [3F8H/IRQ4] Onboard Serial Port 2 [Disabled] UART2 Use As [Disabled] Parallel Port Mode [ECP+EPP] ECP DMA Select [3] Onboard AC97 Modem Controller [Enabled] Onboard AC97 Audio Controller [Enabled] Speech POST Reporter [Enabled] 4.4.3 PCI Configuration Slot 1/5, 2, 3, 4, 6 IRQ [Auto] PCI/VGA Palette Snoop [Disabled] PCI Latency Timer [32] USB Function [Both] Onboard PCI Audio Controller [Enabled] 4.4.3.1 PCI IRQ Resource Exclusion IRQ XX Reserved [No/ICU] Power Management [User Defined] Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] ACPI Suspend To RAM [Disabled] Suspend Mode [Disabled] 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] Wake/Power Up On Ext. Modem [Disabled] Power Up On PCI Card [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Mouse [Disabled] Automatic Power Up [Disabled] 4.5.2 Hardware Monitor MB Temperature [xxxC/xxxF] CPU Temperature [xxxC/xxxF] Power Temperature [xxxC/xxxF] Q-FanControl [Disabled] Boot Sequence Removable Device [Legacy Floppy] IDE Hard Drive ATAPI CD-ROM Other Boot Device Select [INT18 Device (Network)] Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Page Page 5.1.1 Windows 98 first time installation 5.2.1 Running the support CD 5.3.1 Installation Procedure 5.3.2 Available Installation Menus Page 5.4.1 Starting ASUS PC Probe 5.4.2 Using ASUS PC Probe Settings CPU Cooling System Setup When CPU Overheated History Information Hard Drives Memory Device Summary DMI Explorer Utility Execute Program 5.4.3 ASUS PC Probe Task Bar Icon 5.5ASUS Live Update 5.6.1 3Deep Color Tuning 5.6.2 The 3Deep Control Panel Launching the program Playing the default wave files Changing the default language Customizing your POST messages Page 5.8ASUS MyLogo2™ Page 5.9.1 The C-MediaAudio Mixer 5.9.2 The C-MediaApplications 5.9.3 Connector Configuration Connector Settings and Functions 5.10 Using the Promise Chip for RAID 0 or 5.10.1 Installing the Hard Disks 5.10.2 Enter FastTrak133 BIOS and FastBuild Utility 5.10.3 Creating a RAID 0 Array 5.10.4 Creating a RAID 1 Array Page 5.10.5 Other FastBuild Utility Commands 5.10.6 Alternative Set Ups and Other Details 5.11.1 Win9x-MEPromise® MBFastTrak133™ Lite BIOS 5.11.2 Win2000 Promise® MBFastTrak133™ Lite Driver Page Page Page Index Symbols Index