4 . Keyboard and mouse power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard and mouse wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar) or click the mouse. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

KBPWR1

2

1

 

3

2

 

 

 

 

 

+5V +5VSB (Default)

P5CR-LS

P5CR-VM Keyboard and mouse power setting

5 . Gigabit LAN controller setting (3-pin LAN_EN1)

These jumpers allow you to enable or disable the onboard Broadcom BCM5721 Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature.

P5CR-LS

LAN_EN1

 

3

2

2

1

 

Enable

Disable

(Default)

 

P5CR-VM LAN_EN1 setting

2 - 20

Chapter 2: Hardware information