4.4.3Remote Access Configuration
The items in this menu allow you to configure the Remote Access features. Select an item then press <Enter> to display the configuration options.
Configure Remote Access type and parameters | Select Remote Access | ||
Remote Access |
| [Disabled] | type. |
|
| ||
Serial port number | [COM1] |
| |
Base Address, IRQ | [3F8h, 4] |
| |
Serial Port Mode | [115200, 8,n,1] |
| |
Flow Control |
| [None] |
|
Redirection after BIOS POST | [Always] |
| |
Terminal Type |
| [ANSI] |
|
Key Support | [Enabled] |
| |
Sredir Memory | Display Delay | [No Delay] |
|
Remote Access [Disabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
The succeeding items appear when the item Remote Access is set to [Enabled].
Serial port number [COM1]
Sets the serial port for console redirection. Make sure the selected port is enabled. Configuration options: [COM1] [COM2]
Base Address, IRQ [3F8h, 4]
Sets the base address and IRQ assignment of the selected serial port . This item is
Serial Port Mode [115200, 8,n,1]
Allows you to select the serial port mode settings.
Configuration options: [115200 8,n,1] [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1]
Flow Control [None]
Allows you to select the flow control for console redirection. Configuration options: [None [Hardware] [Software]
ASUS | 4 - 21 |