Hit ÔDELÕ Message Display [Enabled]
When set to Enabled, the system displays the message ÒPress DEL to run SetupÓ during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]
4.6.3Security
The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.
Security Settings |
|
| <Enter> | to change |
Supervisor Password | : Not | Installed | password. | |
<Enter> | again to | |||
User Password | : Not | Installed | disabled password. | |
Change Supervisor | Pas |
|
sword |
|
|
Boot Sector Virus | Protection | [Disabled] |
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a Supervisor Password:
1.Select the Change Supervisor Password item and press <Enter>.
2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.
3.Confirm the password when prompted.
The message ÒPassword InstalledÓ appears after you successfully set your password.
To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message ÒPassword UninstalledÓ appears.
4 - 34 | Chapter 4: BIOS setup |