13 . Auxiliary panel connector (20-pin AUX_PANEL1)

This connector supports several server system functions.

P5CR-VM

AUX_PANEL1

LAN2_LINKACTLED- +5VSB

LAN2_LINKACTLED+ AUX_BMCLOCLED#

LAN1_LINKACTLED+ GND

LAN1_LINKACTLED- AUX_BMCLOCBNT#

+5VSB AUX_BMCLOCLED#

I2CDATA_P0 AUX_LOCLED1

GND GND

CASEOPEN I2CCLK_P0

NC +5VSB

P5CR-VM Auxiliary panel connector

PIN1

¥Chassis Intrusion connector (3-pin CASEOPEN)

This lead is for a chassis with an intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

¥LAN1 link activity LED (2-pin LAN1_LINKACTLED)

This 2-pin connector is for the LAN1 Activity LED. Connect the LAN1 Activity LED cable to this connector. This LED blinks during a network activity and is always lit when linked.

¥LAN2 link activity LED (2-pin LAN2_LINKACTLED)

This 2-pin connector is for the LAN2 Activity LED. Connect the LAN2 Activity LED cable to this connector. This LED blinks during a network activity and lights up when linked.

¥Locator LED 1 (2-pin LOCATORLED1)

This 2-pin connector is for the Locator LED 1. Connect the Locator LED 1 cable to this connector. This LED lights up when the Locator button is pressed and if there is no LAN1 connection (e.g. the LAN1 controller is broken).

¥Locator LED 2 (2-pin LOCATORLED2)

This 2-pin connector is for the Locator LED 2. Connect the Locator LED 2 cable to this connector. This LED is synchronized with the LAN2 LED.

¥Locator Button/Switch (2-pin LOCATORBTN)

This connector is for the locator button. This button queries the state of the system locator.

¥Front Panel SMBus (6-1 pin)

This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface.

ASUS P5CR-VM

2 - 33