Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options:
[Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]
4.4.2MPS Configuration
This menu allows you to configure the
MPS | Configuration | Select MPS Revision. |
MPS | Revision | [1.4] |
MPS Revision [1.4]
Allows you to choose the MPS revision.
Configuration options: [1.1] [1.4]
4 - 20 | Chapter 4: BIOS setup |